MOLYSLIP - MCC | Metal Cutting Compound | Withstands Extreme Pressure | Reduce Heat and Friction on Metal Tools | Maximise Tool Life | Soft Paste for Brush or Dip Application | 450g

I've never used cutting oil when drilling or cutting metal. I had to drill out some screw heads and, having invested in a decent set of cobalt drills, thought I'd do things properly. Applied a drop of the Moly to the screw head and drilling results were brilliant. I even went back to some old HSS bits and tried those - very impressive. Eased and improved cutting and prevented drill bit overheating. Well worth the investment.

I bought this mainly for tapping holes, but found it works wonders anywhere a tooth is cutting metal. I use a chop saw with a carbide tipped blade for cutting aluminium bar and tube prior to machining, this kept getting clogged teeth until I started putting a couple of drops of this on the cut line before cutting. That's all it takes to give a smooth quiet cut with no clogging. Fantastic stuff, makes manual hacksawing way easier too.

Very effective at cooling when drilling, cutting etc. Much thicker than aerosol spray cutting oil, which runs away too fast as well as giving off unnecessary VOCs. Works well on stainless steel.

It does the job however the plastic nozzle gets worn off and then it pours out. Made a nozzle from a ball pump needle and a water bottle lid, much better now.

Good product

Great product that actually works. Saves a fortune in worn out drill bits!

If you have never tried this product you are in for a revelation. It transforms cutting of all types of tools, keeps the edge on cutters and drills much longer than the usual gunge. On flat surface cuts it has the ability to keep the swarf in a tidy bundle around the cut, so easy to keep hollow cutters clear. Economical in use. Highly recommended.

Yes I used the oil as lubricant while drilling in to metal quality of oil is out standing I would recommend it