SwitchBotSmart Relay Switch 1PM, Power Metering Smart Relay Module with Built-in Bluetooth Repeater, Wi-Fi&Bluetooth Switch Works with Alexa/Apple Home/Google Home/Matter Hub Required, 2.4GHz

Purchased these to install in an office renovation behind blank wall plates. They were easy to wire and set up with the SwitchBot app. After the initial setup, I was also able to add them to my Home Assistant instance using Matter with ease. They can now be controlled by both the SwitchBot app and directly via Home Assistant.The only feature I would like to see in the future is passing the power management feature to Home Assistant. This data is currently only accessible via the SwitchBot app.

Works great i use this with my switch hub 2 to turn on and off my boiler circulator for my base board heating. You need the purple one to do this and i will be getting another one when my switch hub 3 arrives.

This should be a 5 star product but their decision to use 4 point type for the instructions makes the manual uselesss. Functionally it has been flawless. It was relatively easy to set up in the app and Alexa automatically added it to its device functions. I quickly added 4 more to my system for a total of 8. They activate/automate 12V lights in the RV, the remote switch on a gate opener, exhaust fans and low voltage lights. So far they have all operated exactly as they should. The less than 2"x3" instruction sheets are just silly.

It works, and it's good. Small, real Matter support. Better than Tuya things.The only problem is that it takes time to open the light from the app, because the guys who developed the app block your control until it gets the electric consumption. So don't get the P model, unless you really care about knowing the kWh usage.Also, this supports 1 switch only, so be aware that if you need to control more than one switch, choose the other ones..

I used this relay to make my pool lights smart and it works flawlessly, even inside the metal enclosure that contains all my the pool wiring and breakers. My router says the wifi signal is very weak, but this relay still works like a champ inside this closed metal enclosure and enduring Florida’s heat! This device is so great and reliable that now I am looking into other SwitchBot products for my smart home.If you are curious: I replaced the wired Intermatic manual pool lights controller with this little relay, not connected to any switch at all. This means that now I control the lights only using the app or HomeKit.

This thing is champ. wire anyway you want, works with Apple Home. Great!

There are already well established home automation protocols that have been in use for years, but this company decided to not pay any of that attention, and lead potential customers into thinking this will work fine with a SmartThings Zigbee hub, which it will not.So, just to humor things and verify it's even working, I add the switch to my SwitchBot (I use their little temp / humidity sensors) app just to see if I can live with switching them that way. All installed fine, but one of the switches were defective; 120VAC in just fine, the relay in the switch clicks as it is supposed to, but no 120V output whatsoever.Boxed 'em up and sent them back. There's another 1/2 hour of my life I'll never get back due to someone else's negligence in making a defective, terrible product.

Bought this to have a contact closure input, which it does do splendidly. Except only for the load its currently operating and you can not disassociate that link or use the button press as a separate signal in your smart home controllers. It did however take my bluetooth curtain controller and make it shared as matter, which is awesome