Universal Gasket Seal for UPVC Double Glazing Windows and Doors in White (PER METRE)

Bought this on the off chance that it would cure the leak at the pvc door at the back when the rain was beating on it. The original seal was at its end and was dozed and had no sponginess left in it. I cut out the bottom part (which is less than 1 metre) and replaced it with the new gasket seal. Fitted perfectly with a bit of an overhang so that it seals properly. Yes it takes a little while to put in. About 3 minutes!!!! I used a small flat head screwdriver to push the small lip into the seal holder. You need to take care when doing this. Obviously it will take a while to put it in as it needs to be a snug fit to avoid water getting through. Will purchase another 5 or 6 metres to change the whole door seal at some stage but it keeps the water out now so no real hurry to do this . Good product. Well worth the money.

Easy to fit and looked better on my white uPVC windows than the black which no longer fitted ( new double glazed unit )And only downside was I had to lay it out first for a while to get the kinks out and longer length would be bettet

Replaced the original cracked/damaged 12 year old pvc door gasket. Easy to fit, starting at the top corner I just pushed it into the groove and worked my way round the frame. This looks identical to my original gasket and although it wasn't as tight in the groove to start with has now after two weeks of opening and closing embedded in well.

I didn't think this would be brilliant as its pvc type covered foam but I needed to do something about the seal.But actually it s very good. Pushes into place and works. Obviously don't know how it will be over long term but happy with it.

Did the job, easy to replace the old seal for a woman who doesn't do DIY much quieter now I hardly hear anything, the seal is very light and flimsy but works fine. I'm happy with it.

I found this to be exactly what I was looking for as the rubber gasket on my door frame had perished and worn flat in places.I was a bit nervous of fitting as being a 65 year old woman never done anything like that before. Once I removed the old gasket it was a easy matter just starting centre bottom of the frame, feeding around and finishing again at centre bottom.I would suggest before trimming to close the door as this pushes the gasket into place making sure you have a tight join.All in all I am a very satisfied customer!

Arrived really quickly, and was surprisingly easy to put in!! My old gasket for the back door had perished with the help of jumping dogs and was in shreds, as I put the seal in I found that there was a seal missing - so I was really pleased I had bought 10 metres - draft free! I would advise pushing the gasket in with the back of a blunt knife and I also used some PVA glue to keep it in

Simple to fit and makes an enormous difference to the windows. I though the frames were severe storm damaged and needed replaced, then realised it was simply the draft excluder's had deteriorated with sunlight. Window manufacturers said the seals were no longer available and it need hot welded, too complicated etc, etc. BUT found these, the old ones pulled out the channel, these slotted back in easily and fitted perfectly. It took a morning to do all the windows, and we're toastie warm again :-)Arrived overnight to Skye.