EZDIY-FAB GPU VGA PCIE 8 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card-Standard Type 2 Pack

Don't let some other reviews fool you about these being unsafe. It seems that there are some people reviewing these that understand how to use a multi-meter, but don't really understand how GPU's are powered. Yes, all of the ground pins are common as are the three 12v pins. This is NOT dangerous, and it is NOT a short as these people are implying. It seems they decided to use a single ground plane and a single 12v plane on the circuit board. The GPU only uses 12v and ground. As long as you're getting the proper signal on the proper pins, which all five that I've bought do, you're perfectly fine. If you were finding the ground and 12v bridged... that would be a short, and would be absolutely dangerous. Not a single one of these that I've bought have had a short. You can ignore the reviews saying these are unsafe because the grounds are all common as well as the 12v, and that's perfectly safe for this applications. These people simply do not understand what they're talking about.As to the rest of the product. They do what they do well, they're constructed about as well as you can expect them to be and they look quite good... much better than the majority that just put some foam on the back to protect the exposed circuit board. Above all else, they're safe to use. My one complaint is that there is no latch, which makes sense if the latch is on the inside of the connector as it would be very hard to reach. However, once connected, the connection is pretty snug and they don't back out easily.I'm using a different set on a 3070 Ti and they've been working great. I was using this set on a 3080 Ti, but opted to go with the Thermal Grizzly WireView. Not for any shortcomings of this product, but the way I have the GPU setup and my custom cables, it was pulling on these in a way I didn't like and the WireView is a single block making it more ridged for this application. It's also nice that it can display how much wattage and current the GPU is currently consuming in real time. However, it is quite a bit more expensive.If you need a 180° adapter and you don't want to spend a lot, but you want it to look nice, these are a must. Just be sure that the orientation is correct for your GPU. A lot of people are giving these bad reviews because they didn't read and bought the wrong kit. If you're willing to spend more and you'd like to be able to see the current power consumption, I highly recommend the Thermal Grizzly WireView.

I didn't need this to solve Nvidia connector problems, but thought I'd try the different look of the adapter. They plugged into cable and gpu clean and easy, and the manufacturing quality looks great. It's been 4 months with no issues and I now love the look with no bending cables. The 8pin cables now lay flat against the gpu backplate

Works great. Easy to install.

Did a minor upgrade to my computer to get ready for Windows 11; Intel i7-6700 to AMD 3700X. The new motherboard, installed in a horizontal case, had the PCI-e x16 right under the 200mm case fan. So, after installing 6750X GPU and plugging in the 2 x 8pin (split), the cable loop was hitting the fan, preventing fan to spin. The 180 Degree Angle Connector is low profile and moves the cable downwards towards the motherboard. The fan now spins freely. The secondary effect of the connector is that it makes the GPU more aesthetically appealing. As if there are no cables connected to the GPU when looking down.

Worked for awhile and then one day I heard thee beeps on boot and my 7900xtx was no longer detected. Here's the culprit....

Just got these because my CPU cooler (Noctua D15...BIG BOY) is a little too big and causes issues with the power cables for my vertically mounted GPU. These work fantastic so far. They are a great fit to my Saffire Pulse 7900XTX. My only issue with them is that the build quality is a little meh. If these were to be frequently reinstalled I feel like they might eventually fall apart but its really just the outer plastic housing. Since its for GPU, that shouldn't be a thing though because you should only ever really have to remove these if taking your GPU apart to re-paste the chip. I don't see me needing to remove these anytime soon. Will be buying some more for my wife's GPU next. Great pricing too!!!

I recently gave up on using a vertical mount on my PNY RTX3090 as the card was running too hot. These adapters do away with the messy cabling that encouraged me to try vertical mounting in the first place. They also keep my AIO pipes away from the hot backplate.

these things saved my ass. they work great, exactly as expected, quality is great as well.