PyleHome Compact Public Address Mono Amplifier - Professional 50W Mini Home Power Audio Sound PA Speaker Receiver System w/RCA, Headphone, 2 Microphone Inputs, Independent Volume Control - PT110

Q: Is this amp 12v only and not for use with a 110 power source?

Actually it can use 3 different voltages, 12 VDC, 110 AC or 220 AC

Q: The specs say it has a 3.5 mm jack on the front, but I don't see it in the picture. Where is it?

It has 3 one is for head phones. mic one mic two

Q: Will this work by connecting to multiple speakers in a public gathering place?

Yes, multiple speakers can be attached, however there are some rules to follow. 1. The speakers must match the amplifiers output impedance (I'll explain) and 2. You must not exceed the amplifiers power rating...in this case 80 watts.Back to rule 1: For multiple speakers, use the 25Volt or 70Volt output terminations (screws). The speakers must have the ability to be set to either, usually with a movable tap. You can stack, in parallel several speakers...now the 2nd rule comes in. The speakers must also have a movable power tap so you can set the amout of "watts". The total watts of all speakers combined should not exceed 80. For example, if you need to have 4 speakers in your hall or other public gathering placing, they can only be set to a maximum (individually) of 20 watts. In total, then you have an 80 watt load. Remember all the speakers must be either 70v if you're using the 70v tap on the amp, or 25v if you're using the 25v tap on the amp.Good engineering practice says you should leave some "overhead", so if I were doing these 4 speakers, I'd set them for a max of 15 watts (times 4 is 60 watts) leaving 20 watts overhead. Depending on your "room", you may start out by setting them to 10 watts, testing the system for loudness. If you find that that's sufficient, leave it at 10.One other caution...some amplifiers have output "short" protection in the event you accidently short the speaker leads while the amp is on. This one does NOT, so be careful when wiring the speakers...leave the amp off until you're all done....good luck!!

Q: can I connect this amp to a lap top for a live online audio feed?

Yes, just take the computer output from the 1/8 jack, feed that into one of the RCA female plugs on the back of amp, then select the proper input selection on the front of the amp.

4.2/5

Product ID: 257004914

Secure Transaction

Details

Item dimensions L x W x H
29.2 x 12.4 x
Voltage
70 Volts
Manufacturer
Sound Around
Maximum supply voltage
220 Volts
Minimum supply voltage
12 Volts

🎤2 Mic Inputs

📏Compact Size

🔊50W Power

Frequently Bought Together

Pyle 80W Compact PA Mono Amplifier - Professional Mini Audio Receiver with 2 Mic Inputs/RCA /AUX/Headphone Jack - Bluetooth 5.0 - Independent Volume Control - for Public Address & Home Use - PT110

Pyle Indoor/Outdoor PA Horn Speaker - 8” Portable PA Speaker with 8 Ohms Impedance & 65 Watts Peak Power - Mounting Bracket & Hardware Included PHSP5, White

Desktop Gooseneck Wired Microphone System - Table Mounted Corded Voice Condenser Mic with Pop Filter - XLR to 1/4'' Sound Cord - for Karaoke, Conference, Studio Audio Recording - Pyle PDMIKC5 Black

Description

🎶 Amplify Your Presence with PyleHome!

COMPACT PORTABLE - Take your sound system anywhere with its sleek, mini design.
UNLEASH YOUR VOICE - Elevate your sound experience with 50W of powerful amplification!
TAILORED SOUND CONTROL - Enjoy personalized audio with independent volume controls for each input.
VERSATILE CONNECTIVITY - Connect effortlessly with 3.5mm AUX, RCA, and dual mic inputs.
USER FRIENDLY INTERFACE - Navigate easily with a front panel control center and LED indicators.

The PyleHome Compact Public Address Mono Amplifier is a professional-grade 50W mini audio system designed for versatility and portability. It features multiple input options, including RCA and dual microphone inputs, allowing for seamless integration with various audio devices. Its compact size makes it ideal for both personal and professional use, while independent volume controls ensure tailored sound management.